CX8095
Click image for Gallery
DIN rail Industrial PC
– 32 bit, 400 MHz CPU
– 512 MB microSD flash memory (optionally 1 GB, 2 GB, 4 GB or 8 GB)
– 64 MB internal main memory
– protocol: EtherNet/IP (slave)
– operating system: Microsoft Windows Embedded CE 6.0
– programming: TwinCAT 2 PLC
– interfaces: 1 x Ethernet 10/100 Mbit/s (RJ45), 1 x USB device (behind the front flap)
– bus interface: 2 x Ethernet RJ45 (switched)
– I/O connection: E-bus (EtherCAT Terminals) or K-bus (Bus Terminals), automatic detection
– clock: internal battery-backed clock for time and date (battery behind the front flap, exchangeable)
– UPS: 1-second UPS (for 1 MB of persistent data)
– protection class: IP 20
– weight approx. 180 g
– dimensions (W x H x D) 64 x 100 x 73 mm
| Information | |
| About product | The CX8095 is a control system with EtherNet/IP slave interface. The EtherNet/IP interface is designed as a 2-port switch for realisation of daisy-chain cabling. K-bus or E-bus terminals can be attached as required; the CX8095 automatically recognises the type of I/O system connected during the start-up phase. The control system is programmed with TwinCAT via the fieldbus interface or the additional Ethernet interface. |
| PC technical data | |
| Control software | TwinCAT 2 PLC |
| Flash memory | 512 MB microSD (optionally expandable) |
| I/O connection | E-bus or K-bus, automatic recognition |
| Main memory | 64 MB DDR2 RAM (not expandable) |
| Operating system | Microsoft Windows Embedded CE 6 |
| Operating temperature | 0…+55 °C |
| Processor | ARM9, 400 MHz |
| Protocol | EtherNet/IP (slave) |
| TC3 performance class | - |