KL2692
Click image for Gallery
cycle monitoring terminal (watchdog)
2 digital inputs 24 V DC
2 relay outputs, 230 V AC, 2 A, potential-free normally-open contact, 4-wire systemcycle monitoring terminal (watchdog)
2 digital inputs 24 V DC
2 relay outputs, 230 V AC, 2 A, potential-free normally-open contact, 4-wire systemcycle monitoring terminal (watchdog)
2 digital inputs 24 V DC
2 relay outputs, 230 V AC, 2 A, potential-free normally-open contact, 4-wire systemcycle monitoring terminal (watchdog)
2 digital inputs 24 V DC
2 relay outputs, 230 V AC, 2 A, potential-free normally-open contact, 4-wire systemcycle monitoring terminal (watchdog)
2 digital inputs 24 V DC
2 relay outputs, 230 V AC, 2 A, potential-free normally-open contact, 4-wire systemcycle monitoring terminal (watchdog)
2 digital inputs 24 V DC
2 relay outputs, 230 V AC, 2 A, potential-free normally-open contact, 4-wire systemcycle monitoring terminal (watchdog)
2 digital inputs 24 V DC
2 relay outputs, 230 V AC, 2 A, potential-free normally-open contact, 4-wire system
| Information | |
| About product | The KL2692 Bus Terminal monitors a bit that is toggled by the controller during each cycle. If the toggle signal fails, the controller switches off two potential-free relay circuits in order to prevent damage to the machine. Failure of the toggle signal may be caused by the PLC cycle stopping, by a fault in the bus cable or connector, or by a fault in a bus device. The cycle monitoring time can be parameterised. The Bus Terminal has an enable input that enables the relay to be switched on if a correct toggle signal is detected. |
| I/O attributes | |
| Bus type | K-bus |
| I/O type | DO |
| Signal Type | 30 V DC |
| Number of channels | 2 |
| Special features / functions | |
| DC, XFC, Oversampling | No |
| Intrinsically safe (Ex i) | No |
| Safety (Sil3 / Cat. 4, PL e, SC) | No |
| Temperature range | 0…+55 °C |
| Connection technology | 2-wire |
| IP class | IP20 |